19 thread Standard Wire with eye terminal, ø14 mm, Length 20,4 m, Furlex 400S/E/TD ø11 mm Clevis Pin Dimensioned for a righting moment

Dimensioned for a righting moment at 30° heel of maximum 550 kNm on a masthead rigged monohull yacht and 450 kNm on a fractional rig

The bronze version was included in all Furlex A

a plastic washer which is placed between block body and shackle

The System 22 Jib Car Kit is a set of two 500 mm tracks

WireDiam: 10

19 thread Standard Wire with eye terminal, ø14 mm, Length 20,4 m, Furlex 400S/E/TD ø11 mm Clevis Pin Dimensioned for a righting momentThe original wire for Furlex 400S E and TD. 1x19 strands, AISI 316 stainless steel. The purpose of the plastic tube at the top end is to center the wire in the luff extrusion and prevent chafe between wire and top extrusion. This bearing is permanently fixed with a talurit. The newer Furlex models, of the 4th generation, has a purpose made top guard and do not need the roller. Our recommendation is that the forestay wire is replaced after 20000